Armstrong Posted January 14, 2016 Share Posted January 14, 2016 Please could I ask for peoples advice on the colour fringing shown in this photo? http://i272.photobucket.com/albums/jj167/Armstrong2008/th_Alamy%20Forum%20Upload_zps7f9r41lr.jpg Would this count as a QC fail under Chromatic Aberration? Link to comment Share on other sites More sharing options...
Niels Quist Posted January 15, 2016 Share Posted January 15, 2016 Most of it is not CA, but what is called flare, I think. If you could remove some of it in a defringe function it may help a lot. The problem with this image is that it is in a quite large and central part of the image. I have had images passing QC with thin twigs in a corner after the use of the defringe function and making sure it was not CA.. Link to comment Share on other sites More sharing options...
Jill Morgan Posted January 15, 2016 Share Posted January 15, 2016 I am a dedicated defringe slider user. Works a charm. Jill Link to comment Share on other sites More sharing options...
spacecadet Posted January 15, 2016 Share Posted January 15, 2016 I agree, it's colour flare, not CA which would also have affected the sign. I don't know if it will help this image much, but CA removal is in my LR import preset these days. Link to comment Share on other sites More sharing options...
Martin Carlsson Posted January 15, 2016 Share Posted January 15, 2016 Lightroom's Lens Corrections (with the sliders and tick boxes) most often do the trick, but for the most stubborn or those cases where the slider actually degrade the image quality I use the "Clean CA" under "Enhancements"-->"Finish" in the Raya Pro panel, a little investment, with many uses that I can highly recommend (especially if you're into exposure blending, luminosity masks etc.) http://www.shutterevolve.com/raya-pro-the-ultimate-digital-blending-workflow-panel-for-photoshop/ Link to comment Share on other sites More sharing options...
Allan Bell Posted January 15, 2016 Share Posted January 15, 2016 I do not use CA preset and treat each image in its own right. The reason is that I have had a couple of images where CA removal was used and the action actually reversed the CA so I had to remove it by hand using the sliders. Allan Link to comment Share on other sites More sharing options...
Inchiquin Posted January 15, 2016 Share Posted January 15, 2016 I do not use CA preset and treat each image in its own right. The reason is that I have had a couple of images where CA removal was used and the action actually reversed the CA so I had to remove it by hand using the sliders. Wouldn't be quicker and simpler to use the preset as a general rule and just manually alter any pics that need it? Alan Link to comment Share on other sites More sharing options...
DDoug Posted January 15, 2016 Share Posted January 15, 2016 Does defringing in Lightroom work equally well with TIFF files as with raw? Link to comment Share on other sites More sharing options...
Allan Bell Posted January 15, 2016 Share Posted January 15, 2016 Does defringing in Lightroom work equally well with TIFF files as with raw? I have not tried it with TIFF files. Allan Link to comment Share on other sites More sharing options...
Phil Crean Posted January 15, 2016 Share Posted January 15, 2016 I use it sometimes with PSD files and it works ok...ish! Sometimes it's a bit too enthusiastic and needs to have the colour slider adjusted especially near blue skies. Phil Link to comment Share on other sites More sharing options...
spacecadet Posted January 15, 2016 Share Posted January 15, 2016 Does defringing in Lightroom work equally well with TIFF files as with raw?A file is a file, I don't see why not. Out of interest what do you use TIFFs for? Link to comment Share on other sites More sharing options...
DDoug Posted January 15, 2016 Share Posted January 15, 2016 Thanks for replies. I use and like Silkypix Developer Studio Pro6 for raw files. It works well on lateral CA where needed, but I've recently started doing tabletop with a black knob PC-Nikkor 35mm. It's fine, but I've noticed some fringing that I can't fix in Silkypix. I've been duplicating the layer, selectively desaturating the lower layer in Photoshop, and erasing through. It's a lot of handwork. I thought it might be coming from a deficient CRI in my light and I should bite the bullet for a studio flash. It's more likely longitudinal CA in the lens. So, my reason for wanting to use Lightroom on TIFF files is so that I could go about my usual workflow and simply add LCA correction. Cheers, Don Link to comment Share on other sites More sharing options...
Armstrong Posted January 15, 2016 Author Share Posted January 15, 2016 Thanks for everyone for your replies. I've just tried the de-fringe sliders in LR which didn't improve it. I will have a look at it again with 'fresh eyes' tomorrow and make a decision on whether to submit. Link to comment Share on other sites More sharing options...
Jill Morgan Posted January 15, 2016 Share Posted January 15, 2016 Have you tried the defringe adjustment tool in ACR? It always works for me. Jill Link to comment Share on other sites More sharing options...
Armstrong Posted January 15, 2016 Author Share Posted January 15, 2016 Have you tried the defringe adjustment tool in ACR? It always works for me. Jill Thanks Jill, I haven't yet (only in LR) but have PS so will have a try this evening. Link to comment Share on other sites More sharing options...
MDM Posted January 15, 2016 Share Posted January 15, 2016 Thanks for replies. I use and like Silkypix Developer Studio Pro6 for raw files. It works well on lateral CA where needed, but I've recently started doing tabletop with a black knob PC-Nikkor 35mm. It's fine, but I've noticed some fringing that I can't fix in Silkypix. I've been duplicating the layer, selectively desaturating the lower layer in Photoshop, and erasing through. It's a lot of handwork. I thought it might be coming from a deficient CRI in my light and I should bite the bullet for a studio flash. It's more likely longitudinal CA in the lens. So, my reason for wanting to use Lightroom on TIFF files is so that I could go about my usual workflow and simply add LCA correction. Cheers, Don Just curious why you don't do the entire conversion for these particular images in Lightroom (or ACR) as you are probably less likely to be successful working on a TIFF than a raw file. Lightroom (and ACR 7 and later) deal extremely well with lateral CA with a simple tick box. This doesn't do anything for longitudinal CA of course but it is magic for lateral CA. I know you say you want to keep your Silkypix workflow but you might be making an awful lot of extra work for yourself doing it that way. Link to comment Share on other sites More sharing options...
MDM Posted January 15, 2016 Share Posted January 15, 2016 Have you tried the defringe adjustment tool in ACR? It always works for me. Jill Thanks Jill, I haven't yet (only in LR) but have PS so will have a try this evening. As far as I know and I think I'm pretty solid on this one, there is no difference between the defringe sliders in LR and ACR assuming the same versions are used. Link to comment Share on other sites More sharing options...
Jill Morgan Posted January 15, 2016 Share Posted January 15, 2016 Have you tried the defringe adjustment tool in ACR? It always works for me. Jill Thanks Jill, I haven't yet (only in LR) but have PS so will have a try this evening. As far as I know and I think I'm pretty solid on this one, there is no difference between the defringe sliders in LR and ACR assuming the same versions are used. I don't use LR, so can't compare, but the adjustment tool in ACR allows you to select only the area you want to work on. Don't know if LR does that, as I am an ACR devotee. Jill Link to comment Share on other sites More sharing options...
Armstrong Posted January 15, 2016 Author Share Posted January 15, 2016 Have you tried the defringe adjustment tool in ACR? It always works for me. Jill Thanks Jill, I haven't yet (only in LR) but have PS so will have a try this evening. As far as I know and I think I'm pretty solid on this one, there is no difference between the defringe sliders in LR and ACR assuming the same versions are used. Thanks Michael, I'm on the CC versions of both. I don't usually use ACR so am unfamiliar with it. I will have a quick look later to see if I can get a different result. Link to comment Share on other sites More sharing options...
DDoug Posted January 15, 2016 Share Posted January 15, 2016 Thanks for replies. I use and like Silkypix Developer Studio Pro6 for raw files. It works well on lateral CA where needed, but I've recently started doing tabletop with a black knob PC-Nikkor 35mm. It's fine, but I've noticed some fringing that I can't fix in Silkypix. I've been duplicating the layer, selectively desaturating the lower layer in Photoshop, and erasing through. It's a lot of handwork. I thought it might be coming from a deficient CRI in my light and I should bite the bullet for a studio flash. It's more likely longitudinal CA in the lens. So, my reason for wanting to use Lightroom on TIFF files is so that I could go about my usual workflow and simply add LCA correction. Cheers, Don Just curious why you don't do the entire conversion for these particular images in Lightroom (or ACR) as you are probably less likely to be successful working on a TIFF than a raw file. Lightroom (and ACR 7 and later) deal extremely well with lateral CA with a simple tick box. This doesn't do anything for longitudinal CA of course but it is magic for lateral CA. I know you say you want to keep your Silkypix workflow but you might be making an awful lot of extra work for yourself doing it that way. I like a lot about Silkypix and have no experience as yet with Lightroom. When I made the decision some years ago, Silkypix worked a lot better for me than ACR. Both programs are different today than they were then, but I tend to get stuck in a rut when I find something I like, am averse to learning new software unless it proves really necessary, and am more strongly averse when it involves spending more money. Looks like it might be time to get out of my rut. Edit: p.s., about what I like specifically in Silkypix, it's the Dodge and Color Burn, film simulations, and handling Fuji-X files without smearing foliage. Link to comment Share on other sites More sharing options...
MDM Posted January 15, 2016 Share Posted January 15, 2016 Thanks for replies. I use and like Silkypix Developer Studio Pro6 for raw files. It works well on lateral CA where needed, but I've recently started doing tabletop with a black knob PC-Nikkor 35mm. It's fine, but I've noticed some fringing that I can't fix in Silkypix. I've been duplicating the layer, selectively desaturating the lower layer in Photoshop, and erasing through. It's a lot of handwork. I thought it might be coming from a deficient CRI in my light and I should bite the bullet for a studio flash. It's more likely longitudinal CA in the lens. So, my reason for wanting to use Lightroom on TIFF files is so that I could go about my usual workflow and simply add LCA correction. Cheers, Don Just curious why you don't do the entire conversion for these particular images in Lightroom (or ACR) as you are probably less likely to be successful working on a TIFF than a raw file. Lightroom (and ACR 7 and later) deal extremely well with lateral CA with a simple tick box. This doesn't do anything for longitudinal CA of course but it is magic for lateral CA. I know you say you want to keep your Silkypix workflow but you might be making an awful lot of extra work for yourself doing it that way. I like a lot about Silkypix and have no experience as yet with Lightroom. When I made the decision some years ago, Silkypix worked a lot better for me than ACR. Both programs are different today than they were then, but I tend to get stuck in a rut when I find something I like, am averse to learning new software unless it proves really necessary, and am more strongly averse when it involves spending more money. Looks like it might be time to get out of my rut. Understandable. I used Bridge, ACR and Photoshop for years but finally went to Lightroom about 4 years ago and soon wished I had done it several years before, as it has a very decent database as well as the raw converter, which is basically identical to ACR. The converters has improved massively over the years, especially since 2012. Lightroom itself has also improved a lot (version 6 has significant speed enhancements for one thing). You could download a trial version of Lightroom if you don't want to subscribe. I'm still using PSCS6 and Lightroom 6.3 rather than the CC version. However, if you don't have a newish version of Photoshop, then CC might be well worth it. It sounds like you do use Photoshop and versions since CS5 are way better than earlier in terms of speed. Just to add, sometimes not upgrading is false economy - software improvememts can mean major time savings. Link to comment Share on other sites More sharing options...
Betty LaRue Posted January 16, 2016 Share Posted January 16, 2016 The upright filter alone in LR saves a lot of time for me. I use to fiddle forever with some buidings perspectives in PS. Most of the time now, it's done with one click. I love that adjustment. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.